dúvida Raspberry pi 3/ Blynk

[linomateus]

Boa noite, estou utilizando o Raspberry pi3 e montei um servidor chamado Blynk nele, porém o mesmo depois de alguns dia fica offline sozinho ai tenho que reiniciar o rasp para o servidor subir novamente, alguém esta passando por isso ?

[zazulak]

Buenas,

 

o raspberry morre totalmente, ou só o processo do blynk? Tipo, quando o blynk para, você ainda consegue conectar so raspberry via SSH ou dar ping nele? Se conseguir, poste a saída do dmesg aqui. O blynk pode estar caindo por estouro de memória ou algo assim.

[linomateus]

apenas o blynk para, consigo acessar o raspberry normalmente pelo vncviewer, o que seria a saída dmesg ?, poderia me explicar o que e ese estouro de memoria, sou iniciante ainda.

[zazulak]

Ups.. você está usando Windows no Pi? 

[linomateus]

Eu acesso o Raspberry remotamente pelo windows, mas o Raspberry e físico não e virtual não .

Editado: 29 de Agosto de 2019 por linomateus

[zazulak]

3 minutos atrás, linomateus disse:

Eu acesso o Raspberry remotamente pelo windows.

Sim, mas que sistema roda no Pi exatamente? Windows 10 iot, Raspbian Pi, etc?

[linomateus]

@zazulak Raspbian

Editado: 29 de Agosto de 2019 por linomateus

[zazulak]

Agora, linomateus disse:

@zazulak Debian 

Beleza... se fosse windows já ia dizer pra jogar fora e instalar linux, porque windows não se presta pra servidor.

 

Ponha ele pra rodar normalmente, e quando o blynk parar, logue via vnc, abra um terminal e dê o comando "dmesg".. e o resultado do comando você copia e posta aqui. Provavelmente ele vai mostrar por que o processo do blynk está caindo.

[linomateus]

@zazulak Beleza vou esperar ele parar novamente e posto aqui.

[linomateus]

@zazulak  consegue o log

 

pi@raspberrypi:~ $ dmesg

[    0.000000] Booting Linux on physical CPU 0x0

[    0.000000] Linux version 4.19.58-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1245 SMP Fri Jul 12 17:25:51 BST 2019

[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d

[    0.000000] CPU: div instructions available: patching division code

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2

[    0.000000] Memory policy: Data cache writealloc

[    0.000000] cma: Reserved 8 MiB at 0x3ac00000

[    0.000000] On node 0 totalpages: 242688

[    0.000000]   Normal zone: 2133 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 242688 pages, LIFO batch:63

[    0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0

[    0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632

[    0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555

[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles

[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Memory: 939088K/970752K available (8192K kernel code, 629K rwdata, 2176K rodata, 1024K init, 821K bss, 23472K reserved, 8192K cma-reserved)

[    0.000000] Virtual kernel memory layout:

                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)

                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)

                   vmalloc : 0xbb800000 - 0xff800000   (1088 MB)

                   lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)

                   modules : 0x7f000000 - 0x80000000   (  16 MB)

                     .text : 0x(ptrval) - 0x(ptrval)   (9184 kB)

                     .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)

                     .data : 0x(ptrval) - 0x(ptrval)   ( 630 kB)

                      .bss : 0x(ptrval) - 0x(ptrval)   ( 822 kB)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] ftrace: allocating 26351 entries in 78 pages

[    0.000000] rcu: Hierarchical RCU implementation.

[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16

[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).

[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns

[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns

[    0.000019] Switching to timer-based delay loop, resolution 52ns

[    0.000277] Console: colour dummy device 80x30

[    0.000296] console [tty1] enabled

[    0.000343] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)

[    0.000359] pid_max: default: 32768 minimum: 301

[    0.000699] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000714] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.001630] CPU: Testing write buffer coherency: ok

[    0.002092] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

[    0.002746] Setting up static identity map for 0x100000 - 0x10003c

[    0.002896] rcu: Hierarchical SRCU implementation.

[    0.003694] smp: Bringing up secondary CPUs ...

[    0.004530] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

[    0.005455] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

[    0.006316] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

[    0.006439] smp: Brought up 1 node, 4 CPUs

[    0.006450] SMP: Total of 4 processors activated (153.60 BogoMIPS).

[    0.006456] CPU: All CPU(s) started in HYP mode.

[    0.006461] CPU: Virtualization extensions available.

[    0.007437] devtmpfs: initialized

[    0.020547] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4

[    0.020787] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

[    0.020804] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.021389] pinctrl core: initialized pinctrl subsystem

[    0.022253] NET: Registered protocol family 16

[    0.025313] DMA: preallocated 1024 KiB pool for atomic coherent allocations

[    0.031087] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[    0.031096] hw-breakpoint: maximum watchpoint size is 8 bytes.

[    0.031297] Serial: AMBA PL011 UART driver

[    0.033571] bcm2835-mbox 3f00b880.mailbox: mailbox enabled

[    0.068606] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1

[    0.070296] SCSI subsystem initialized

[    0.070520] usbcore: registered new interface driver usbfs

[    0.070575] usbcore: registered new interface driver hub

[    0.070668] usbcore: registered new device driver usb

[    0.090132] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-07-09 14:40, variant start

[    0.100393] raspberrypi-firmware soc:firmware: Firmware hash is 6c3fe3f096a93de3b34252ad98cdccadeb534be2

[    0.111848] clocksource: Switched to clocksource arch_sys_counter

[    0.201727] VFS: Disk quotas dquot_6.6.0

[    0.201809] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    0.202019] FS-Cache: Loaded

[    0.202231] CacheFiles: Loaded

[    0.212209] NET: Registered protocol family 2

[    0.212969] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)

[    0.213007] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[    0.213116] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[    0.213302] TCP: Hash tables configured (established 8192 bind 8192)

[    0.213437] UDP hash table entries: 512 (order: 2, 16384 bytes)

[    0.213483] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[    0.213790] NET: Registered protocol family 1

[    0.214382] RPC: Registered named UNIX socket transport module.

[    0.214388] RPC: Registered udp transport module.

[    0.214394] RPC: Registered tcp transport module.

[    0.214400] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.216154] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available

[    0.219162] Initialise system trusted keyrings

[    0.219360] workingset: timestamp_bits=14 max_order=18 bucket_order=4

[    0.229055] FS-Cache: Netfs 'nfs' registered for caching

[    0.229618] NFS: Registering the id_resolver key type

[    0.229646] Key type id_resolver registered

[    0.229653] Key type id_legacy registered

[    0.229669] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[    0.231991] Key type asymmetric registered

[    0.232001] Asymmetric key parser 'x509' registered

[    0.232050] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)

[    0.232204] io scheduler noop registered

[    0.232211] io scheduler deadline registered (default)

[    0.232392] io scheduler cfq registered

[    0.232400] io scheduler mq-deadline registered (default)

[    0.232406] io scheduler kyber registered

[    0.235575] bcm2708_fb soc:fb: FB found 1 display(s)

[    0.245460] Console: switching to colour frame buffer device 80x30

[    0.250472] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 640x480

[    0.251525] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled

[    0.253130] bcm2835-rng 3f104000.rng: hwrng registered

[    0.253450] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)

[    0.253953] vc-sm: Videocore shared memory driver

[    0.254270] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000

[    0.265017] brd: module loaded

[    0.275076] loop: module loaded

[    0.275665] Loading iSCSI transport class v2.0-870.

[    0.276365] libphy: Fixed MDIO Bus: probed

[    0.276473] usbcore: registered new interface driver lan78xx

[    0.276530] usbcore: registered new interface driver smsc95xx

[    0.276546] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[    0.304390] dwc_otg 3f980000.usb: base=(ptrval)

[    0.504629] Core Release: 2.80a

[    0.504639] Setting default values for core params

[    0.504669] Finished setting default values for core params

[    0.704954] Using Buffer DMA mode

[    0.704961] Periodic Transfer Interrupt Enhancement - disabled

[    0.704967] Multiprocessor Interrupt Enhancement - disabled

[    0.704974] OTG VER PARAM: 0, OTG VER FLAG: 0

[    0.704991] Dedicated Tx FIFOs mode

[    0.705440] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = bad04000 dma = 0xfad04000 len=9024

[    0.705464] FIQ FSM acceleration enabled for :

               Non-periodic Split Transactions

               Periodic Split Transactions

               High-Speed Isochronous Endpoints

               Interrupt/Control Split Transaction hack enabled

[    0.705472] dwc_otg: Microframe scheduler enabled

[    0.705527] WARN::hcd_init_fiq:457: FIQ on core 1

[    0.705538] WARN::hcd_init_fiq:458: FIQ ASM at 80650e04 length 36

[    0.705550] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000

[    0.705567] dwc_otg 3f980000.usb: DWC OTG Controller

[    0.705601] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1

[    0.705635] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000

[    0.705683] Init: Port Power? op_state=1

[    0.705689] Init: Power Port (0)

[    0.705943] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

[    0.705954] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    0.705964] usb usb1: Product: DWC OTG Controller

[    0.705973] usb usb1: Manufacturer: Linux 4.19.58-v7+ dwc_otg_hcd

[    0.705982] usb usb1: SerialNumber: 3f980000.usb

[    0.706580] hub 1-0:1.0: USB hub found

[    0.706625] hub 1-0:1.0: 1 port detected

[    0.707206] dwc_otg: FIQ enabled

[    0.707212] dwc_otg: NAK holdoff enabled

[    0.707217] dwc_otg: FIQ split-transaction FSM enabled

[    0.707228] Module dwc_common_port init

[    0.707499] usbcore: registered new interface driver usb-storage

[    0.707675] mousedev: PS/2 mouse device common for all mice

[    0.708533] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer

[    0.708770] bcm2835-cpufreq: min=600000 max=1200000

[    0.709233] sdhci: Secure Digital Host Controller Interface driver

[    0.709239] sdhci: Copyright(c) Pierre Ossman

[    0.709608] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe

[    0.709990] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe

[    0.710117] sdhci-pltfm: SDHCI platform and OF driver helper

[    0.711638] ledtrig-cpu: registered to indicate activity on CPUs

[    0.711825] hidraw: raw HID events driver (C) Jiri Kosina

[    0.712030] usbcore: registered new interface driver usbhid

[    0.712035] usbhid: USB HID core driver

[    0.712988] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0

[    0.714485] [vc_sm_connected_init]: start

[    0.723223] [vc_sm_connected_init]: end - returning 0

[    0.724334] Initializing XFRM netlink socket

[    0.724359] NET: Registered protocol family 17

[    0.724468] Key type dns_resolver registered

[    0.725053] Registering SWP/SWPB emulation handler

[    0.725695] registered taskstats version 1

[    0.725711] Loading compiled-in X.509 certificates

[    0.732855] uart-pl011 3f201000.serial: cts_event_workaround enabled

[    0.732935] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2

[    0.734419] console [ttyS0] disabled

[    0.734450] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 53, base_baud = 31250000) is a 16550

[    0.734499] console [ttyS0] enabled

[    0.735533] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0

[    0.735543] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated

[    0.761754] sdhost: log_buf @ (ptrval) (fad07000)

[    0.797871] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

[    0.799437] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[    0.800997] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[    0.803810] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

[    0.809828] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)

[    0.811132] of_cfs_init

[    0.811293] of_cfs_init: OK

[    0.812029] Waiting for root device /dev/mmcblk0p7...

[    0.869046] mmc0: host does not support reading read-only switch, assuming write-enable

[    0.871918] mmc0: new high speed SDHC card at address 0007

[    0.873162] mmcblk0: mmc0:0007 SD16G 14.6 GiB

[    0.876483] random: fast init done

[    0.880186]  mmcblk0: p1 p2 < p5 p6 p7 >

[    0.918689] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)

[    0.918743] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.

[    0.919380] mmc1: new high speed SDIO card at address 0001

[    0.932081] devtmpfs: mounted

[    0.937391] Freeing unused kernel memory: 1024K

[    0.941976] Indeed it is in host mode hprt0 = 00021501

[    1.002383] Run /sbin/init as init process

[    1.151903] usb 1-1: new high-speed USB device number 2 using dwc_otg

[    1.152038] Indeed it is in host mode hprt0 = 00001101

[    1.392186] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00

[    1.392207] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.392875] hub 1-1:1.0: USB hub found

[    1.392969] hub 1-1:1.0: 5 ports detected

[    1.711905] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

[    1.842163] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00

[    1.842179] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    1.844871] smsc95xx v1.0.6

[    1.935301] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:fe:bc:4a

[    2.036535] systemd[1]: System time before build time, advancing clock.

[    2.602977] NET: Registered protocol family 10

[    2.604397] Segment Routing with IPv6

[    2.673568] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)

[    2.674478] systemd[1]: Detected architecture arm.

[    2.683033] systemd[1]: Set hostname to <raspberrypi>.

[    2.726559] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument

[    3.306135] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.

[    3.306159] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)

[    3.903706] random: systemd: uninitialized urandom read (16 bytes read)

[    3.915937] random: systemd: uninitialized urandom read (16 bytes read)

[    3.916602] systemd[1]: Listening on fsck to fsckd communication Socket.

[    3.917057] random: systemd: uninitialized urandom read (16 bytes read)

[    3.920921] systemd[1]: Created slice User and Session Slice.

[    3.921349] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[    3.922182] systemd[1]: Listening on Journal Socket (/dev/log).

[    4.379297] i2c /dev entries driver

[    4.787805] EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)

[    4.907440] systemd-journald[104]: Received request to flush runtime journal from PID 1

[    5.777640] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.

[    5.780362] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[    5.780378] [vc_sm_connected_init]: start

[    5.783650] [vc_sm_connected_init]: installed successfully

[    5.790793] media: Linux media interface: v0.10

[    5.879329] videodev: Linux video capture interface: v2.00

[    6.296599] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.

[    6.296604] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.

[    6.375407] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.

[    6.436830] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.

[    6.443176] bcm2835-codec bcm2835-codec: Device registered as /dev/video10

[    6.443189] bcm2835-codec bcm2835-codec: Loaded V4L2 decode

[    6.446682] bcm2835-codec bcm2835-codec: Device registered as /dev/video11

[    6.446690] bcm2835-codec bcm2835-codec: Loaded V4L2 encode

[    6.449519] bcm2835-codec bcm2835-codec: Device registered as /dev/video12

[    6.449527] bcm2835-codec bcm2835-codec: Loaded V4L2 isp

[    6.670522] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.

[    6.677838] bcm2835_audio soc:audio: card created with 8 channels

[    7.320497] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[    7.503335] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[    7.691294] brcmfmac: F1 signature read @0x18000000=0x1541a9a6

[    7.697113] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1

[    7.697371] usbcore: registered new interface driver brcmfmac

[    7.913663] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1

[    7.913766] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available

[    7.914457] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f

[   11.090016] random: crng init done

[   11.090043] random: 7 urandom warning(s) missed due to ratelimiting

[   11.131135] uart-pl011 3f201000.serial: no DMA platform data

[   11.458373] 8021q: 802.1Q VLAN Support v1.8

[   11.923860] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS

[   14.954113] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

[   16.484884] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1

[   18.659993] Bluetooth: Core ver 2.22

[   18.660081] NET: Registered protocol family 31

[   18.660088] Bluetooth: HCI device and connection manager initialized

[   18.660110] Bluetooth: HCI socket layer initialized

[   18.660123] Bluetooth: L2CAP socket layer initialized

[   18.660162] Bluetooth: SCO socket layer initialized

[   19.239856] Bluetooth: HCI UART driver ver 2.3

[   19.239871] Bluetooth: HCI UART protocol H4 registered

[   19.239965] Bluetooth: HCI UART protocol Three-wire (H5) registered

[   19.240183] Bluetooth: HCI UART protocol Broadcom registered

[   20.370418] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   20.370427] Bluetooth: BNEP filters: protocol multicast

[   20.370441] Bluetooth: BNEP socket layer initialized

[   35.840038] fuse init (API version 7.27)

[50815.991124] warning: process `colord-sane' used the deprecated sysctl system call with 8.1.2.

pi@raspberrypi:~ $

Editado: 30 de Agosto de 2019 por linomateus

[Paulo vitor 48]

Quanto tempo ele mantém ?