pls i need maskrom pins

Hello, benabed brahim!

Welcome to the forum! It's great to see you sharing photos and details about your device. That helps a lot!

You're looking for the MaskROM pins for your MX10-L with the R328A V10 board and Rockchip RK3228A CPU. This is a good starting point for recovery!

To help you better, could you provide a few more details?

• What is the specific defect you are trying to fix? Is it bricked, stuck on a logo, not booting?
• What is the exact model of the MX10-L (if there are different versions)?
• What tests have you already performed on the device?
• Have you tried any specific recovery methods or tools yet?

Based on the photos, the main chip is a Rockchip RK3228A. Often, the MaskROM mode is activated by shorting specific pins on the eMMC chip or on test points near the CPU. Some boards also have dedicated buttons for recovery.

Could you also check if there are any small, unmarked test points (sometimes labeled "TP" or just small pads) near the eMMC chip (the larger square chip next to the Rockchip CPU) or near the Rockchip CPU itself? Sometimes, shorting two specific points or a point to ground during power-up can trigger MaskROM.

Once you provide more details about the defect and any other tests, it will be easier for the community to suggest the correct MaskROM pinout or alternative recovery methods.

Looking forward to your updates!

Prefixo ajustado: atualizei o prefixo deste tópico para em análise. Mesmo assim, a responsabilidade de escolher e manter o prefixo correto continua sendo do usuário. Veja o guia: Prefixos - Saiba aqui como utilizar.

Thank you, my friend, for your reply. The problem is that he used the wrong flash drive, so the computer doesn't recognize it. When I turn it on, it stays on a blue light and nothing appears on the TV. Therefore, I would like you to tell me where I can find the maskrom pins

i find the maskrom pins