@sasserworm11 sasser 

 

 

Already do it paulo but no luck

@sasserworm11 sasser 

 

make a video showing the problem.

Just now, Paulo Noce said:

@sasserworm11 sasser 

 

make a video showing the problem.

Here 

 

Você não tem permissão para visualizar links. Faça login ou cadastre-se.

@sasserworm11 sasser 

 

You have to do the configuration above. in the red circle, press and enter the password and make the change according to the image.

3 minutes ago, Paulo Noce said:

@sasserworm11 sasser 

 

You have to do the configuration above. in the red circle, press and enter the password and make the change according to the image.

Yes already male change .but alarm still beep sir

@sasserworm11 sasser 

 

the module is p DVP12SC?

 

yes correct. 

Just now, Paulo Noce said:

@sasserworm11 sasser 

 

the module is p DVP12SC?

 

 

@sasserworm11 sasser 

 

check the temperature sensor connections. Something wrong can be in reassembly.

I dont have diagram. Can u post the sample of you. Let check below.the tc is marked by 2+,2-,1+&1-. But when i check two of them is disconnected. Im try to place back but dont know exact point.

@sasserworm11 sasser 

 

this your DVP12SC module is different. See the pictures on my topic. Maybe the setup is different in setup. Have you talked to zhuomao about this problem?

They said check the point wrong connection. But im not touch the others only replace back the dvp

@sasserworm11 sasser 

 

my dvp below.

1 minute ago, Paulo Noce said:

@sasserworm11 sasser 

 

my dvp below.

Same bro. Tomorrow i will get the diagram from zm person

@sasserworm11 sasser 

 

ok inform me here in the topic if solved the problem.

Problem solved. I check all wiring and found. Thermocuople wrong pin connection. So at startup tempreture read 200 is abnormal. Alarm beep and cant start. Now im settle with wired back to socket thanks.

Tc read 200 is abnormal and heater not start to heat ,actually is shown at panel temp high

@sasserworm11 sasser 

 

Good evening. Good thing it solved the problem. Congratulations.

@sasserworm11 sasser 

 

We have this defect more in this season. It is good to have the solution, in case some colleague has this problem as well.

The lucky i save the program in plc. And we can write again if program lost in plc. Paolo any post about profile machine has share here? 

@sasserworm11 sasser 

 

For this season no. But I have the profile of Hikari that is the same station as Zhuomao, just change the name.

I'll post here.

@sasserworm11 sasser 

 

I have here in my notebook these two. The season and this one of the image. It does not change anything, just the optical alignment.
Tomorrow I will go through the profiles that I work on.

@sasserworm11 sasser 

 

Hikari station dismantled. Inside like Zhuomao.

 

Yeah inside is zm . I u hav let me know for leaded and leadfree

@sasserworm11 sasser 

 

For notebook line use lead solder and for Apple line use lead-free solder.