dica Problema no módulo DVP12SC Estação ZHUOMAO - ZM-r5860c

[Paulo Noce]

@sasserworm11 sasser 

 

 

[sasserworm11 sasser]

Already do it paulo but no luck

[Paulo Noce]

@sasserworm11 sasser 

 

make a video showing the problem.

[sasserworm11 sasser]

Just now, Paulo Noce said:

@sasserworm11 sasser 

 

make a video showing the problem.

Here 

 

Você não tem permissão para ver links. Faça login ou cadastre-se.

[Paulo Noce]

@sasserworm11 sasser 

 

You have to do the configuration above. in the red circle, press and enter the password and make the change according to the image.

[sasserworm11 sasser]

3 minutes ago, Paulo Noce said:

@sasserworm11 sasser 

 

You have to do the configuration above. in the red circle, press and enter the password and make the change according to the image.

Yes already male change .but alarm still beep sir

[Paulo Noce]

@sasserworm11 sasser 

 

the module is p DVP12SC?

 

[sasserworm11 sasser]

yes correct. 

Just now, Paulo Noce said:

@sasserworm11 sasser 

 

the module is p DVP12SC?

 

 

[Paulo Noce]

@sasserworm11 sasser 

 

check the temperature sensor connections. Something wrong can be in reassembly.

[sasserworm11 sasser]

I dont have diagram. Can u post the sample of you. Let check below.the tc is marked by 2+,2-,1+&1-. But when i check two of them is disconnected. Im try to place back but dont know exact point.

[Paulo Noce]

@sasserworm11 sasser 

 

this your DVP12SC module is different. See the pictures on my topic. Maybe the setup is different in setup. Have you talked to zhuomao about this problem?

[sasserworm11 sasser]

They said check the point wrong connection. But im not touch the others only replace back the dvp

[Paulo Noce]

@sasserworm11 sasser 

 

my dvp below.

[sasserworm11 sasser]

1 minute ago, Paulo Noce said:

@sasserworm11 sasser 

 

my dvp below.

Same bro. Tomorrow i will get the diagram from zm person

[Paulo Noce]

@sasserworm11 sasser 

 

ok inform me here in the topic if solved the problem.

[sasserworm11 sasser]

Problem solved. I check all wiring and found. Thermocuople wrong pin connection. So at startup tempreture read 200 is abnormal. Alarm beep and cant start. Now im settle with wired back to socket thanks.

[sasserworm11 sasser]

Tc read 200 is abnormal and heater not start to heat ,actually is shown at panel temp high

[Paulo Noce]

@sasserworm11 sasser 

 

Good evening. Good thing it solved the problem. Congratulations.

[Paulo Noce]

@sasserworm11 sasser 

 

We have this defect more in this season. It is good to have the solution, in case some colleague has this problem as well.

[sasserworm11 sasser]

The lucky i save the program in plc. And we can write again if program lost in plc. Paolo any post about profile machine has share here? 

[Paulo Noce]

@sasserworm11 sasser 

 

For this season no. But I have the profile of Hikari that is the same station as Zhuomao, just change the name.

I'll post here.

[Paulo Noce]

@sasserworm11 sasser 

 

I have here in my notebook these two. The season and this one of the image. It does not change anything, just the optical alignment.
Tomorrow I will go through the profiles that I work on.

[Paulo Noce]

@sasserworm11 sasser 

 

Hikari station dismantled. Inside like Zhuomao.

 

[sasserworm11 sasser]

Yeah inside is zm . I u hav let me know for leaded and leadfree

[Paulo Noce]

@sasserworm11 sasser 

 

For notebook line use lead solder and for Apple line use lead-free solder.